注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

木棉花的小屋

简单是一种心境,一种感觉、一种味道,一种风格

 
 
 

日志

 
 

【转载】引用 一款披肩  

2014-09-22 17:18:00|  分类: 披肩-三角 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
本文转载自织织不倦《引用 【转载】一款披肩》
一款披肩 - Alina - 艾莲娜
 
一款披肩 - Alina - 艾莲娜
 
一款披肩 - Alina - 艾莲娜
 
一款披肩 - Alina - 艾莲娜
 
一款披肩 - Alina - 艾莲娜
 
一款披肩 - Alina - 艾莲娜
 
一款披肩 - Alina - 艾莲娜
 
一款披肩 - Alina - 艾莲娜
 
一款披肩 - Alina - 艾莲娜
 
一款披肩 - Alina - 艾莲娜
 
一款披肩 - Alina - 艾莲娜
 Yarn
spacer
Miss Babs Hand-dyed Yarns & Fibers Yummy Sock weight [100% Merino wool; 400yd per 4oz skein]; color: French Marigold Monochrome; 2 skeins

Recommended needle size
[always use a needle size that gives you the gauge listed below -- every knitter's gauge is unique]
spacer 1 24-inch or longer US #4/3.5mm circular needle

Notions
spacer yarn needle
spacer rustproof pins and blocking wires or strong smooth yarn for blocking
spacer 60 size 6 beads
spacer crochet hook small enough to fit through beads
spacer cable needle

spacer

GAUGE

28 sts/38 rows = 4 inches in stockinette stitch
Exact gauge is not essential for this project.

 

PATTERN NOTES
[Knitty's list of standard abbreviations and techniques can be found here.]

Construction: This shawl is knit from the top down with yarn overs on the edges and around a center ktbl stitch. A border of 3 garter stitches is used.

Beads: Beads are used to add a bit of decoration to the shawl and may be omitted if desired. This article provides information on how to add beads using a crochet hook, the method used in this design.

It is recommended that after inserting the bead onto the stitch, the stitch is then purled. This allows for greater visibility of the bead on the right side of the garment.

C1R p: place next st on cable needle and hold behind work, k1 tbl, p1 from cable needle
C1L p: place next st on cable needle and hold in front of work, p1, k1 tbl from cable needle
C1R tbl: place next st on cable needle and hold behind work, k1 tbl, k1 tbl from cable needle
P tbl: purl stitch through back of loop.

spacerCharts
The charts for this pattern are very large. Each fits on a letter-sized page.
Click below and print each resulting page.

Foundation
CO 3 sts.

Work 10 rows in garter stitch (knit every row).
Next row [WS]: K3, turn work 90 degrees, pick up and knit 5 stitches along garter ridges, turn work 90 degrees, pick up and knit 3 stitches from CO edge. 11 sts.

Note: Odd numbered rows of foundation chart are worked on the RS from right to left, even numbered rows are worked on the WS from left to right.

Row 1 [RS]: K3, *work Row 1 of foundation chart*, k1 tbl (center st), rep from * to *, k3.
Row 2 [WS]: K3, *work Row 2 of foundation chart*, p1 tbl, rep from * to *, k3.
Row 3 [RS]: K3, *work next row of foundation chart*, k1 tbl, rep from * to *, k3.
Row 4 [WS]: K3, *work next row of foundation chart*, p1 tbl, rep from * to *, k3.
Rep last 2 rows until foundation chart is finished. End with Row 45 [RS]. 103 sts.

Main Charts
Odd numbered rows of the Left, Center, and Right Main Charts are worked on the WS from left to right, even numbered rows are worked on the RS from right to left.

Row 1 [WS]: K3, *work Row 1 of Left Main Chart, work Row 1 of Center Main Chart chart 2 times, work Row 1 of Right Main Chart*, p1 tbl, rep from * to *, k3.
Row 2 [RS]: K3, *work Row 2 of RMC, work Row 2 of CMC 2 times, work Row 2 of LMC*, k1 tbl, rep from * to *, k3.
Row 3 [WS]: K3, *work next row of LMC, work next row of CMC 2 times, work next row of RMC*, p1 tbl, rep from * to *, k3.
Row 4 [RS]: K3, *work next row of RMC, work next row of CMC 2 times, work next row of LMC*, k1 tbl, rep from * to *, k3.
Rep last 2 rows until Left, Center, and Right Main Charts are finished. End with Row 44 of charts [RS]. 183 sts.

Work another repeat of the Main Charts as follows:
Next row [WS]: K3, *work Row 1 of LMC, work Row 1 of CMC 4 times, work Row 1 of RMC*, p1 tbl, rep from * to *, k3.
Next row [RS]: K3, *work Row 2 of RMC, work Row 2 of CMC 4 times, work Row 2 of LMC*, k1 tbl, rep from * to *, k3.
Next row [WS]: K3, *work next row of LMC, work next row of CMC 4 times, work next row of RMC*, p1 tbl, rep from * to *, k3.
Next row [RS]: K3, *work next row of RMC, work next row of CMC 4 times, work next row of LMC*, k1 tbl, rep from * to *, k3
Rep last 2 rows until Main Charts are finished. End with Row 44 [RS]. 263 sts.

Edging Charts
Odd numbered rows of the Left, Center, and Right Edging Charts are worked on the WS from left to right, even numbered rows are worked on the RS from right to left.

Row 1 [WS]: K3, *work Row 1 of Left Edging Chart, work Row 1 of Center Edging Chart 6 times, work Row 1 of Right Edging Chart*, p1 tbl, rep from * to *, k3.
Next row [RS]: K3, *work Row 2 of Right Edging Chart, work Row 2 of Center Edging Chart 6 times, work Row 2 of Left Edging Chart*, k1 tbl, rep from * to *, k3
Next row [WS]: K3, *work next row of Left Edging Chart, work next row of Center Edging Chart 6 times, work next row of Right Edging Chart*, p1 tbl, rep from * to *, k3
Next row [RS]: K3, *work next row of Right Edging Chart, work next row of Center Edging Chart 6 times, work next row of Left Edging Chart*, k1 tbl, rep from * to *, k3
Rep last 2 rows until Edging Charts are finished. End with Row 41 [WS]. 343 sts.

Border
Next row [RS]: K3, yo, k1, p to last st before center st marked by yarn overs, k1, yo, k1 tbl (center st), yo, k1, p to last 4 sts, k1, yo, k3.
Next row [WS]: K to center st marked by yarn overs, p1 tbl (center st), k to end of row.
Rep last 2 rows once more.

Next row [RS]: K3, yo, k to center st marked by yarn overs, yo, k1 tbl (center st), yo, k to last 3 sts, yo, k3
Next row [WS]: K to center st marked by yarn overs, p1 tbl (center st), k to end of row.
Rep last 2 rows twice more.

BO all stitches loosely.



 

  评论这张
 
阅读(8)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017